This is a listing for a 1962-65 Mopar B-Body Standard Engine Wiring Harness

Faithfull reproduction black nylon oil pressure gauge line with correct brass fittings. For use with all small or big block engines.

69 302 (Z28). Deep double groove. Reproduction includes correct part number stamping and coding as original. Stamped steel. Replaces GM Part #: 3956668. Please Note:Stock replacement pulleys are not designed to exceed 400 horsepower or 6,000 RPM. Using reproduction pulleys on engines in excess of these limits my result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body damage. Classic Headquarters and Auto Metal Direct assumeno liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding recommended RPM limitations.

396/325-350 HP also 427 exc. special hi performance & 454. Double groove. Faithful reproduction includes correct part number stamping and coding as original. Stamped steel. Replaces GM Part #: 3955290. Please Note:Stock replacement pulleys are not designed to exceed 400 horsepower or 6,000 RPM. Using reproduction pulleys on engines in excess of these limits my result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body damage. Classic Headquarters and Auto Metal Direct assumeno liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding recommended RPM limitations.

High performance 396/375. Deep double groove. Faithful reproduction includes correct part number stamping and coding as original. Stamped steel. Replaces GM Part #: 3955291. Please Note:Stock replacement pulleys are not designed to exceed 400 horsepower or 6,000 RPM. Using reproduction pulleys on engines in excess of these limits my result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body damage. Classic Headquarters and Auto Metal Direct assumeno liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding recommended RPM limitations.

Faithfull stamped steel reproduction with correct part number and code die stamped as originals. Indispesable when adding air conditioning to long water pump motors, including Vintage Air and other aftermarket A/C kits that do not include needed pulleys. Replaces GM Part #: 3937787. Please Note:Stock replacement pulleys are not designed to exceed 400 horsepower or 6,000 RPM. Using reproduction pulleys on engines in excess of these limits my result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body damage. Classic Headquarters and Auto Metal Direct assumeno liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding recommended RPM limitations.

55-72 Small Block Single Groove Crankshaft Pulley without AC, (6-3/4" Diameter). Stamped 3755820-BC GM GM Group #: 0.659 GM Part #: 3755820

Faithful stamped steel reproduction with correct part number and code die stamped as originals. Indispensable when adding air conditioning to long water pump motors, including Vintage Air and other aftermarket A/C kits that do not include needed pulleys. Replaces GM Part #: 3972180. Please Note:Stock replacement pulleys are not designed to exceed 400 horsepower or 6,000 RPM. Using reproduction pulleys on engines in excess of these limits my result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body damage. Classic Headquarters and Auto Metal Direct assumeno liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding recommended RPM limitations.

Engine, alternator and power steering brackets to install any 1969-72 (long neck water pump) big block engine. Includes all our individually available officially licensed high quality reproductions: Upper and lower alternator brackets, rear spacer and brace, hardware, power steering bracket set and engine frame mounts. Officially Licensed GM Restoration Parts.

Superior reproduction in OEM thickness stamped steel. All new tooling. Coated black. GM Group #: 0.029 GM Part #: 3980938 RH

Faithfull reproductions in OEM thickness stamped steel. Mounts include correct part number stamping as original. Coated Black. GM Part #: RH - 3945507, LH - 3945508 69 Camaro 302, 350, 69-74 Nova 350

Accurate reproductions in OEM thickness stamped steel. Technically correct for the relatively rare 70-72 factory Camaro big blocks. Complete with correct font and size stamped part numbers and logo mark. Exact dimensional height and width allow proper "factory fit" (engine mount attachment) of all new big block installations up to 1981. Black EDP coated. Officially Licensed GM Restoration Parts.

Faithfull reproductions in OEM thickness stamped steel. Mounts include correct part number stamping as original. Coated black. RH and LH pair. Officially Licensed GM Restoration Parts.

Faithfull reproductions in OEM thickness stamped steel. Coated black. (Note: 67-68 mounts correct without part numbers.) RH and LH pair. Officially Licensed GM Restoration Parts.

Superiorreproductions in OEM thickness stamped steel. All new tooling. Includes hole for clutch return spring on LH mount. Coated black. GM Group #: 0.029 GM Part #: 3980938 RH, 3955183 LH Officially Licensed GM Restoration Parts. .67-68 Camaro 302, 327, 350, 69 Camaro 307, 327, 68-72 Nova 307,327.

Accurate reproductions in OEM thickness stamped steel, Technically correct Exact dimensional height and width allows proper factory fit Black EDP coated .

Accurate reproductions in OEM thicknes stamped steel, Technically corect Exact dimensional height and width allows proper factory fit Black EDP coated. Sold as a pair

Big block Engine Lift Bracket Set. USA made heavy stamped steel. Accurate reproduction of originals for listed applications.

Small Block Engine Lift Bracket Set. Heavy stamped steel. Accurate reproduction of originals for listed applications.

O.D. = 2.250" I.D. = 1.150" Gasket O.D. = 1.80" width = 0.445"