Mounting Holes = 1/2" I.D.

Mounting Holes = 1/2" I.D.

OE quality lower A-Arm bushing set. Manufactured by QS-9000/ISO/TS-16944 certified manufacturer to original factory appearance with OE or better quality materials. Two front and two rear. From Classic Suspensions. Officially Licensed GM Restoration Parts.

Often rusted and bent, this multi-piece, prewelded bracket allows the rear of the rear leaf spring to be attached. Welds to frame rail (895-2468-L), trunk floor and rear crossmember (870-1468). It's wise to replace this important part if you're making repairs in this area.

Often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached. Welds to frame rail (895-1570-L), underseat pan (420-1570) and inner rocker panel (440-2570-L Chall.) (440-1570-L Cuda). It's wise to replace this important part if you're making repairs in this area.

Often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached. Welds to frame rail (895-1570-R), underseat pan (420-1570) and inner rocker panel (440-2570-R Chall.) (440-1570-R Cuda). It's wise to replace this important part if you're making repairs in this area.

This 4 piece kit will provide you with all the brackets, front and rear, required to mount the rear leaf springs.

Brackets that allow the front of the rear leaf springs to be attached. Bolts to body as original.

Brackets that allow the front of the rear leaf springs to be attached. Bolts to body as original.

Technically correct, USA made original quality part. Each.

Technically correct, USA made original quality part. Set of four. 4" long

OE quality lower control arm bumper. Manufactured by QS-9000/ISO/TS-16944 certified manufacturer to original factory appearance with OE or better quality materials. From Classic Suspensions. Each. Officially Licensed GM Restoration Parts.

Compare these quality suspension parts with others imported parts for value and savings! OE quality, correct appearance reproduction lower ball joint nearly exact with original factory installed components from Classic Suspension. Lower ball joint includes a technically correct grease boot. Manufactured by a QS-9000 and ISO/TS16-944 certified OE supplier to modern technical and safety specifications while offering GM Classic restorers an original appearance and exact fit replacement of the original. Hardware included. Officially Licensed GM Restoration Parts.

Compare these OE quality suspension parts from QS-9000/ISO/TS-16944 certified manufacturers with others imported parts for value and savings! Manufactured to exact modern technical specifications ensuring an original appearance and exact fit replacement of the original. From Classic Suspensions. Officially Licensed GM Restoration Parts.

OE quality lower rear A-Arm bushing. Manufactured by QS-9000/ISO/TS-16944 certified manufacturer to original factory appearance with OE or better quality materials. From Classic Suspensions. Each. Officially Licensed GM Restoration Parts.

OE quality front rear leaf spring eye bushing. Manufactured by QS-9000/ISO/TS-16944 certified manufacturer to original factory appearance with OE or better quality materials. Each. From Classic Suspensions. Officially Licensed GM Restoration Parts.

Our OE quality shackle sets are made from precision tooling, exactly like originals and exceed GM material specs. Manufactured by QS-9000 and ISO/TS16-944 certified OE suppliers. Plates are precision stamped from high grade medium carbon steel and zinc plated. Special shackle bolts are accurately shouldered, also of high grade medium carbon steel, then "thru hardened" to the same Rockwell hardness as original. Competitors use a lower grade mild steel, with poor quality stamping tooling, and the bolts as lab tested had "zero" hardness! Our competitors bushings use a low grade rubber, where our OEM bushings use a blend of rubber compounds found in today's higher end world cars. The result - superior handling, outstanding ride quality, long life and a shackle that looks and performs exactly like factory original. Suitable for street and sport applications. Correct Marsden style nuts included. Competively priced with the incredible junk out there. You and your customers need the peace of mind Classic Suspensions superior line of certified OE Manufacturer made suspension products can provide. Assembled. . Officially Licensed GM Restoration Parts.