Skip to Content
Trunk Lock Support - 70-74 Barracuda
Use when replacing a trunk floor and/or tail light panel. The bottom section where the panel attaches to the trunk floor is often rusted. It's smarter to replace the part rather than make repairs.
104.99 104.99 USD
Trunk Lock Support - 70-74 Challenger
Use when replacing a trunk floor and/or tail light panel. The bottom section where the panel attaches to the trunk floor is often rusted. It's smarter to replace the part rather than make repairs.
104.99 104.99 USD
Trunk Lock Support - 71-72 Demon; 70-73 Duster
Use when replacing a trunk floor and/or tail light panel. The bottom section where the panel attaches to the trunk floor is often rusted. It's smarter to replace the part rather than make repairs.
99.99 99.99 USD
Trunk Molding Set w/ Hardware - 63 Galaxie (Except Wagon)
Reproduction 3 piece trunk lid molding set with hardware for the 1963 Ford Galaxie. Correct for all 1963 models except wagon. Accurate reproduction anodized aluminum trunk lid molding and both die cast filler pieces between the trunk lid and taillight. All three pieces have matched OE finish as original. Includes all mounting hardare. Replaces Ford part# C3AZ-624512-A (Trunk Molding) 63AZ-6229312-A (RH Filler) 63-AZ-6229313-A (LH Filler) C3AZ-6242527-A (Trunk Lid Clip) 376792-S (Nut) 373528-S (Barrel Clip)
119.99 119.99 USD
Trunk Weatherstrip - 67-69 Camaro Firebird
Exact profile, dense foam style replacement. Soft and pliable original.
17.99 17.99 USD
Trunk to Quarter Panel Corner Braces - LH/RH Pair - 69 Camaro
Braces extend from the trunk floor outer corners to mate against the inside of each quarter panel at the outer bumper mounting points. Original gauge, die stamped. Coated black. RH and LH pair.
21.99 21.99 USD
U-Fit Steel Hood Scoop - 2" Raise
Universal steel hood scoop with a 2" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding the scoop in place. Once welded, the scoop must be body worked prior to painting. Dimensions: 53 3/4" x 24" x 2 1/4"
219.99 219.99 USD
U-Fit Steel Hood Scoop - 4" Raise
Universal steel hood scoop with a 4" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding the scoop in place. Once welded, the scoop must be body worked prior to painting. Dimensions: 55 3/8" x 24 7/8" x 5"
219.99 219.99 USD
Under Rear Seat Floor Panel - 61-63 Galaxie Monterey Marauder (Except Wagon)
Reproduction Under Rear Seat Floor Pan for 1961-64 Ford Galaxie 2/4DR & convertible models.This item is not for use on wagon models. Often rusted or damaged, this floor pan sits under the rear seat mating to the rearedge of the front floor pan and the front edge of the trunk floor. It's a good idea to change this panel when replacing the front floor pan or trunk floor pan. Stamped from high quality OE gauge steel on our exclusive new tools. Each floor pan features correct as original bends, contours, seams and holes. Like all AMD parts, this item arrives EDP coated to help protect against rust and corrosion. Replaces Ford part#C3AZ-621160-A
324.99 324.99 USD
Under Rear Seat Floor Panel - LH - 70-81 Camaro Firebird
Second generation Camaros and Firebirds are prone to rust underneath and behind the rear seat. Our rear floor pans will solve this problem. We offer a complete rear seat pan as well as left and right side patches. Each part includes all the bends, contours, holes, etc. of the originals.
86.50 86.5 USD
Under Rear Seat Floor Panel - RH - 70-81 Camaro Firebird
Second generation Camaros and Firebirds are prone to rust underneath and behind the rear seat. Our rear floor pans will solve this problem. We offer a complete rear seat pan as well as left and right side patches. Each part includes all the bends, contours, holes, etc. of the originals.
74.99 74.99 USD
Upper & Lower Door Hinge Bolt Set (30pcs) - 68-81 Camaro Firebird; 68-74 Chevy II Nova; 68-72 Chevelle El Camino
Correct door hinge bolt set for mounting steel hinges. Bolts are 5/16-18 X 1 1/4" with "23" head marking.
36.99 36.99 USD
Upper Cowl Panel - 66-67 Fairlane Comet Cyclone Falcon Ranchero
Reproduction upper cowl panel for 66-67 Ford Fairlane, Falcon & Ranchero and 66-67 Mercury Comet & Cyclone. Made like OE. Each piece is stamped from high quality OE gauge steel on our exclusive new tools and features the correct shape, size, bends and holes, like original. EDP coated to help protect against rust and corrosion. Replaces Ford part# C6OZ-6202010-B, C6OZ-6202010-C, C6OZ-6202010-D, C6OZ-6202010-E
359.99 359.99 USD
Upper Cowl Panel - 68-70 Falcon; 68-69 Fairlane Torino Ranchero Comet Cyclone Montego
Reproduction upper cowl panel for 68-70 Ford Falcon & 68-69 Fairlane, Torino, Ranchero, Comet Cyclone and Montego. Made like OE. Each piece is stamped from high quality OE gauge steel on our exclusive new tools and features the correct shape, size, bends and holes, like original. EDP coated to help protect against rust and corrosion. Replaces Ford part# C8OZ-5402010-A, C8OZ-5402010-B
359.99 359.99 USD